Streaming front · Octo-TIGER

The experiment

Physical setup

A periodic cube contains a one-dimensional square wave along x. Initially, the half with −L/2 ≤ x < 0 has energy density E_hi = 1; the other half has E_lo = 10⁻¹⁰. The physical flux is (cE, 0, 0). The profile is uniform in y and z, and translates in the positive x direction at speed c.

The bright and dark levels are constants in the profile. Periodicity supplies both a rising and a falling edge. There is no thermal emission or absorption. New paired runs have explicit scattering optical depth χL = 10⁻⁴; the saved configuration identifies any legacy zero-opacity run.

The standard runner uses a uniform cubic grid with hydrodynamics and gravity disabled. Its CGS box spans −3 × 10¹⁰ to +3 × 10¹⁰ cm on each axis, with c = 2.99792458 × 10¹⁰ cm/s and default final time 4 s. Opt-in adaptive runs are identified below; N = INX × 2^level then describes their configured finest equivalent resolution. Each completed run below lists its recorded parameters.

The comparison

Comparison and interpretation

The discontinuous reference is an exact zero-opacity nonlinear M1 solution, used as a free-streaming-limit comparison at positive opacity. The comparison integrates the translated top-hat over each cell, so a cell crossed by a front receives the appropriate bright fraction instead of a point sample.

a = x − ct − Δx/2, b = a + Δx
f = [I(b) − I(a)] / Δx
Ē = E_lo + (E_hi − E_lo) f, F̄ = (cĒ, 0, 0)

The periodic primitive is I(s) = kL/2 + min(r, L/2), where k = floor[(s + L/2)/L] and r = s + L/2 − kL. This handles any number of box crossings. The implementation clamps the computed fraction to [0, 1] to remove roundoff excursions.

What this test measures

The useful diagnostics are front width, overshoot or undershoot, transport speed, and integrated conservation. Discontinuities reduce convergence order, so a second-order guide on a plot is a comparison slope rather than a pass criterion. The transverse fluxes should remain zero. Exactly zero errors have no logarithmic convergence order and are reported with a dash.

Measured results

All resolutions

Level	Grid	Batch status
3	64³	Ready

Convergence requires at least two completed, comparable resolutions.

Full-volume norms and orders

Grid	Field	Norm	Error	Order	Error units
64³ cells	er	L1	2.033188e-02	—	erg/cm³
64³ cells	er	L2	5.546417e-02	—	erg/cm³
64³ cells	er	Linf	2.233963e-01	—	erg/cm³
64³ cells	fx	L1	6.096745e+08	—	erg/(cm² s)
64³ cells	fx	L2	1.662806e+09	—	erg/(cm² s)
64³ cells	fx	Linf	6.697487e+09	—	erg/(cm² s)
64³ cells	fy	L1	0.000000e+00	—	erg/(cm² s)
64³ cells	fy	L2	0.000000e+00	—	erg/(cm² s)
64³ cells	fy	Linf	0.000000e+00	—	erg/(cm² s)
64³ cells	fz	L1	0.000000e+00	—	erg/(cm² s)
64³ cells	fz	L2	0.000000e+00	—	erg/(cm² s)
64³ cells	fz	Linf	0.000000e+00	—	erg/(cm² s)

This problem: norms/orders CSV JSON

64³ cells / level 3

Recorded setup and run provenance

Origin	Octo-TIGER application
Domain	Cube of side 6.000000e+10 cm; centered at the origin
Resolution	64³ cells; finest Δx = 9.375000e+08 cm
Final comparison time	2.000000e-01 s
Radiation model	M1
Radiation integration	M1 RK1 (first order in time)
Flux semantics	Evolved M1 flux moment
Radiation backend	cpu
Physical light speed	2.997925e+10 cm/s
Reduced-speed factor α	1.000000e+00
Radiation transport speed	2.997925e+10 cm/s
Periodic boundaries	on
Hydrodynamics	off
Gravity	off
Implicit radiation source	on
Uniform grid	on
CFL	0.4
Timestep cap	0.00033333333333333338 s
Output interval	0.0016666666666666668 s

{
  "background": 1.0,
  "c": 29979245800.0,
  "case": "streaming_front",
  "cells": 64,
  "command": [
    "/ddnB/work/dmarce1/octotiger-m1-fld-20261014/campaign/control/launch-solver",
    "/ddnB/work/dmarce1/octotiger-m1-fld-20261014/build/octotiger",
    "--config_file=/ddnB/work/dmarce1/octotiger-m1-fld-20261014/campaign/runs/l3-streaming_front-m1/streaming_front/l3/run.ini",
    "--hpx:threads=64"
  ],
  "comparison_signature": {
    "atomic_mass": "1",
    "atomic_number": "1",
    "cfl": "0.4",
    "code_to_cm": "1",
    "code_to_g": "1",
    "code_to_s": "1",
    "disable_analytic": "off",
    "disable_diagnostics": "on",
    "eos": "IDEAL",
    "gravity": "off",
    "hard_dt": "0.00033333333333333338",
    "hydro": "off",
    "hydro_device_kernel_type": "OFF",
    "hydro_host_kernel_type": "LEGACY",
    "monopole_device_kernel_type": "OFF",
    "multipole_device_kernel_type": "OFF",
    "n_species": "1",
    "omega": "0",
    "periodic": "on",
    "problem": "RADIATION_STREAMING_FRONT",
    "rad_implicit": "on",
    "rad_test_amplitude": "0.01",
    "rad_test_background": "1",
    "rad_test_chi": "1.6666666666666668e-15",
    "rad_test_luminosity": "2.6981321220000001e+29",
    "rad_test_width": "6000000000",
    "radiation": "on",
    "radiation_algorithm_version": 1,
    "radiation_integrator": "euler",
    "radiation_model": "m1",
    "radiation_reduced_c_factor": "1",
    "stop_step": "100000",
    "stop_time": "0.20000000000000001",
    "unigrid": "on",
    "xscale": "30000000000"
  },
  "config": {
    "atomic_mass": "1",
    "atomic_number": "1",
    "cfl": "0.4",
    "code_to_cm": "1",
    "code_to_g": "1",
    "code_to_s": "1",
    "datadir": "/ddnB/work/dmarce1/octotiger-m1-fld-20261014/campaign/runs/l3-streaming_front-m1/streaming_front/l3/",
    "disable_analytic": "off",
    "disable_diagnostics": "on",
    "disable_output": "off",
    "eos": "IDEAL",
    "gravity": "off",
    "hard_dt": "0.00033333333333333338",
    "hydro": "off",
    "hydro_device_kernel_type": "OFF",
    "hydro_host_kernel_type": "LEGACY",
    "max_level": "3",
    "min_level": "3",
    "monopole_device_kernel_type": "OFF",
    "multipole_device_kernel_type": "OFF",
    "n_species": "1",
    "odt": "0.0016666666666666668",
    "omega": "0",
    "periodic": "on",
    "problem": "RADIATION_STREAMING_FRONT",
    "rad_implicit": "on",
    "rad_test_amplitude": "0.01",
    "rad_test_background": "1",
    "rad_test_chi": "1.6666666666666668e-15",
    "rad_test_luminosity": "2.6981321220000001e+29",
    "rad_test_width": "6000000000",
    "radiation": "on",
    "radiation_backend": "cpu",
    "radiation_integrator": "euler",
    "radiation_model": "m1",
    "radiation_reduced_c_factor": "1",
    "stop_step": "100000",
    "stop_time": "0.20000000000000001",
    "unigrid": "on",
    "xscale": "30000000000"
  },
  "conservation": [
    {
      "boundary": 0.0,
      "boundary_fraction": 0.0,
      "field": "er",
      "final": 1.0800000001080002e+32,
      "final_fraction": 1.0000000000000002,
      "history_end_time": 0.2,
      "history_scope": "full_run",
      "history_start_time": 0.0,
      "initial": 1.080000000108e+32,
      "initial_fraction": 1.0,
      "integral_units": "erg",
      "max_abs_residual": 1.8014398509481984e+16,
      "max_normalized_error": 1.6679998618222725e-16,
      "normalization_basis": "abs(initial_energy)",
      "normalization_scale": 1.080000000108e+32,
      "normalization_time": 0.0,
      "normalized_error": 1.6679998618222725e-16,
      "normalized_residual": 1.6679998618222725e-16,
      "raw_change": 1.8014398509481984e+16,
      "residual": 1.8014398509481984e+16,
      "source": 0.0,
      "source_fraction": 0.0,
      "zero_initial_flux_relative_tolerance": 1.4210854715202004e-14
    },
    {
      "boundary": 0.0,
      "boundary_fraction": 0.0,
      "field": "fx",
      "final": 3.237726191699073e+42,
      "final_fraction": 0.9999900069680193,
      "history_end_time": 0.2,
      "history_scope": "full_run",
      "history_start_time": 0.0,
      "initial": 3.237758546723776e+42,
      "initial_fraction": 1.0,
      "integral_units": "erg cm/s",
      "max_abs_residual": 1.2953073473192807e+27,
      "max_normalized_error": 4.000629845082107e-16,
      "normalization_basis": "abs(initial_component)",
      "normalization_scale": 3.237758546723776e+42,
      "normalization_time": 0.0,
      "normalized_error": 2.3644805780177354e-16,
      "normalized_residual": 2.3644805780177354e-16,
      "raw_change": -3.235502470303399e+37,
      "residual": 7.655617200039297e+26,
      "source": -3.2355024703799554e+37,
      "source_fraction": -9.993031980886581e-06,
      "zero_initial_flux_relative_tolerance": 1.4210854715202004e-14
    },
    {
      "boundary": 0.0,
      "boundary_fraction": 0.0,
      "field": "fy",
      "final": 0.0,
      "final_fraction": 0.0,
      "history_end_time": 0.2,
      "history_scope": "full_run",
      "history_start_time": 0.0,
      "initial": 0.0,
      "initial_fraction": 0.0,
      "integral_units": "erg cm/s",
      "max_abs_residual": 0.0,
      "max_normalized_error": 0.0,
      "normalization_basis": "c * abs(initial_energy)",
      "normalization_scale": 3.237758546723776e+42,
      "normalization_time": 0.0,
      "normalized_error": 0.0,
      "normalized_residual": 0.0,
      "raw_change": 0.0,
      "residual": 0.0,
      "source": 0.0,
      "source_fraction": 0.0,
      "zero_initial_flux_relative_tolerance": 1.4210854715202004e-14
    },
    {
      "boundary": 0.0,
      "boundary_fraction": 0.0,
      "field": "fz",
      "final": 0.0,
      "final_fraction": 0.0,
      "history_end_time": 0.2,
      "history_scope": "full_run",
      "history_start_time": 0.0,
      "initial": 0.0,
      "initial_fraction": 0.0,
      "integral_units": "erg cm/s",
      "max_abs_residual": 0.0,
      "max_normalized_error": 0.0,
      "normalization_basis": "c * abs(initial_energy)",
      "normalization_scale": 3.237758546723776e+42,
      "normalization_time": 0.0,
      "normalized_error": 0.0,
      "normalized_residual": 0.0,
      "raw_change": 0.0,
      "residual": 0.0,
      "source": 0.0,
      "source_fraction": 0.0,
      "zero_initial_flux_relative_tolerance": 1.4210854715202004e-14
    }
  ],
  "dx": 937500000.0,
  "executable_sha256": "ca38f12e338eed0b7074dbb15c70c089a8d31d1c12aa87f5b044c42824721f0b",
  "inx": 8,
  "length": 60000000000.0,
  "level": 3,
  "movie_capture": {
    "hard_dt": 0.0003333333333333334,
    "odt": 0.0016666666666666668,
    "requested_snapshots": 121,
    "steps_per_output_check": 1
  },
  "norms": {
    "er": {
      "L1": 0.02033188,
      "L2": 0.05546417,
      "Linf": 0.2233963
    },
    "fx": {
      "L1": 609674500.0,
      "L2": 1662806000.0,
      "Linf": 6697487000.0
    },
    "fy": {
      "L1": 0.0,
      "L2": 0.0,
      "Linf": 0.0
    },
    "fz": {
      "L1": 0.0,
      "L2": 0.0,
      "Linf": 0.0
    }
  },
  "origin": "Octo-TIGER application",
  "physical_c": 29979245800.0,
  "radiation_algorithm_version": 1,
  "radiation_backend": "cpu",
  "radiation_equations": "physical-c",
  "radiation_flux_semantics": "evolved_m1_flux",
  "radiation_integrator": "euler",
  "radiation_model": "m1",
  "radiation_reduced_c_factor": 1.0,
  "reference_exact_for_solver": false,
  "reference_kind": "free-streaming-limit",
  "reference_model": "zero-opacity-m1-advection",
  "reference_sampling": "cell averages",
  "status": "complete",
  "streaming_opacity": 1.6666666666666668e-15,
  "streaming_optical_depth": 0.0001,
  "time": 0.2,
  "transport_c": 29979245800.0,
  "units": {
    "chi": "1/cm",
    "energy_density": "erg/cm^3",
    "flux": "erg/(cm^2 s)",
    "length": "cm",
    "luminosity": "erg/s",
    "mass": "g",
    "source": "erg/(cm^3 s)",
    "system": "CGS",
    "time": "s"
  },
  "validation_scope": "Explicit positive scattering opacity. The zero-opacity M1 advection profile is a free-streaming-limit reference, not an exact solution at finite opacity."
}

Final fields and profiles

Central cell layer at z=dx/2; ray at y=z=dx/2.

Numerical/reference line profiles and signed errors for all four radiation fields · PDF

All three flux maps

fx: numerical, reference, and signed-error slice · PDF

fy: numerical, reference, and signed-error slice · PDF

fz: numerical, reference, and signed-error slice · PDF

Saved-state movie

Streaming Front · L3 · M1 RK1

121 stored states; 121 shown. Physical time: 0–0.2 s. Playback: 60 s.

Zero-order hold; no solution interpolation. Playback holds each saved numerical state over its time interval and includes endpoint holds.

All 121 snapshot times

Snapshot times: 0, 0.00166666667, 0.00333333333, 0.005, 0.007, 0.00866666667, 0.0103333333, 0.012, 0.0136666667, 0.0153333333, 0.017, 0.0183333333, 0.02, 0.0216666667, 0.0233333333, 0.025, 0.0266666667, 0.0283333333, 0.03, 0.0316666667, 0.0333333333, 0.035, 0.0366666667, 0.0383333333, 0.04, 0.0416666667, 0.0436666667, 0.0453333333, 0.047, 0.0486666667, 0.0503333333, 0.052, 0.0536666667, 0.0553333333, 0.057, 0.0586666667, 0.0603333333, 0.062, 0.0636666667, 0.0653333333, 0.067, 0.0686666667, 0.0703333333, 0.0716666667, 0.0733333333, 0.075, 0.0766666667, 0.0783333333, 0.08, 0.0816666667, 0.0833333333, 0.085, 0.0866666667, 0.0883333333, 0.09, 0.0916666667, 0.0933333333, 0.095, 0.0966666667, 0.0983333333, 0.1, 0.101666667, 0.103333333, 0.105, 0.106666667, 0.108333333, 0.11, 0.111666667, 0.113333333, 0.115, 0.116666667, 0.118333333, 0.12, 0.121666667, 0.123333333, 0.125, 0.126666667, 0.128333333, 0.13, 0.131666667, 0.133333333, 0.135, 0.136666667, 0.138333333, 0.14, 0.141666667, 0.143333333, 0.145, 0.146666667, 0.148333333, 0.15, 0.151666667, 0.153333333, 0.155333333, 0.157, 0.158666667, 0.160333333, 0.162, 0.163666667, 0.165333333, 0.167, 0.168666667, 0.170333333, 0.172, 0.173666667, 0.175333333, 0.177, 0.178666667, 0.180333333, 0.182, 0.183666667, 0.185333333, 0.187, 0.188666667, 0.190333333, 0.192, 0.193666667, 0.195333333, 0.197, 0.198666667, 0.2 s.

Arrows show the independently evolved M1 radiation flux. Arrows have equal length and show direction only.

Movies show numerical states at explicit positive opacity. Final profiles use the zero-opacity analytic solution only as a free-streaming-limit reference.

Central z=0+ radiation energy slice with faint cell mesh and equal-length flux direction arrows. Arrows show the independently evolved M1 radiation flux. Fixed color limits; actual stored Silo times held without solution interpolation. Movies show numerical states at explicit positive opacity. Final profiles use the zero-opacity analytic solution only as a free-streaming-limit reference. The maps show the full simulation domain without cropping.

Download MP4 · Rendering and timing metadata · Full run report

All campaign movies

Conservation

All values below are dimensionless fractions of the fixed normalization scale at t_ref = 0 s.

Field	Scale	Q(t_ref)/scale	Q(t)/scale	Boundary B/scale	Source S/scale	Residual R/scale	Maximum \|R\|/scale
er	\|Q(t_ref)\|	1.000000e+00	1.000000e+00	0.000000e+00	0.000000e+00	1.668000e-16	1.668000e-16
fx	\|Q(t_ref)\|	1.000000e+00	9.999900e-01	0.000000e+00	-9.993032e-06	2.364481e-16	4.000630e-16
fy	c \|E(t_ref)\| (zero/negligible reference flux)	0.000000e+00	0.000000e+00	0.000000e+00	0.000000e+00	0.000000e+00	0.000000e+00
fz	c \|E(t_ref)\| (zero/negligible reference flux)	0.000000e+00	0.000000e+00	0.000000e+00	0.000000e+00	0.000000e+00	0.000000e+00

Integrated radiation budgets and their transport/source-corrected residuals · PDF

Data and reproducibility

Effective configuration Run metadata Solver log Paired slice values CSV Slice units Raw conservation history Budget summary CSV Conservation fractions CSV Fraction units Conservation units L1 norms L2 norms L∞ normsFinal numerical Silo (local file; excluded from staged site)Reference Silo (local file; excluded from staged site)

This problem: all conservation summaries CSV JSON

Momentum plots are omitted for this fixed-material problem. The prescribed medium acts as an external momentum reservoir, so radiation momentum exchange does not imply that a compensating gas momentum was evolved.

Reading the results

Errors, budgets, and movies

Every norm uses the full three-dimensional domain, with cell-volume weighting. Here e = numerical − reference and V is the domain volume:

L1 = Σ |e| ΔV / V, L2 = √(Σ e² ΔV / V), L∞ = max |e|
p = ln(error_coarse / error_fine) / ln(Δx_coarse / Δx_fine)

Orders require two completed runs with matching physical time, configuration, units, executable, and origin. An exact zero error has no logarithmic order. The central slice and line profiles are visual diagnostics: the report slice is the cell layer at z = Δx/2, and its line profile is at y = z = Δx/2.

Conservation is assessed using the measured domain integrals and the signed cumulative boundary and source budgets:

A labeled checkpoint continuation uses its checkpoint as t_ref, with counters and fixed normalization starting there. Its reported residuals cover that resumed segment only; original histories remain separate.

R(t) = Q(t) − Q(0) + B(t) − S(t)

B is outward transport and S is the source change. Conservation plots and this page's budget tables show fractions of the initial totals: Q(t)/D, [Q(0) − B(t) + S(t)]/D, and the signed residual R(t)/D. The denominator D = |Q(0)| is fixed for the entire history. It never grows with the current total or accumulated transport/source budgets. A negative initial flux therefore starts at −1, and the plotted fraction retains its sign.

A component whose initial net flux is zero or negligible cannot be divided by its own initial total. It instead uses the fixed scale D = c |E₀|, where E₀ is the initial integrated radiation energy. This fallback is labeled on its panels and in the table. “Negligible” means |Q(0)|/(c |E₀|) ≤ 64ε ≈ 1.421085 × 10⁻¹⁴, with ε the double-precision machine epsilon. This prevents roundoff left by cancellation in a symmetric field from becoming the denominator. For the initially cold Marshak case, the prescribed bath sets D = E_bath V for energy and D = c E_bath V for flux, with E_bath = 4/c. These scales remain fixed even though radiation enters the initially empty domain.

Raw histories and dimensional summary columns remain in physical units: energy integrals in erg, physical-flux integrals in erg cm/s for CGS runs. Dividing a flux integral by c² gives radiation momentum. Fraction-history CSV files are dimensionless except for their time column; summary files record each denominator and its basis. Maximum fractional residuals use the same fixed denominator as the final residual.

For runs labeled RSLA, these budgets check the modified radiation equations. They do not establish conservation of physical gas-plus-radiation energy. With reduced-speed factor α, the closed-system coupled invariants are Egas + Er/α and gas momentum + F/(αc²), with physical c in the closure. Compare multiple α values before interpreting an RSLA result as an approximation to physical-c evolution.

Movies show the numerical Silo states with a fixed color range for each movie. Recorded states are held for their actual simulation-time gaps; intermediate solutions are not interpolated. The 3D option shows the domain's exterior surface. Movies and plots retain their recorded physical units.

Sources & provenance

Where this problem comes from

The suite constructs this periodic half-filled square wave directly in streamingFront and frontIntegral in octotiger/test_problems/radiation/profiles.hpp. It is an exact-advection verification problem; the available source does not attribute this particular setup to a published benchmark.

Radiation method context

M1 RK1 evolves radiation energy and flux moments with the retained first-order radiation update. FLD uses backward-Euler radiation diffusion/material exchange with the Levermore–Pomraning limiter. Moving cases add first-order conservative gas transport and radiation force/work; their reconstructed lab-frame flux includes (E I+P) v as well as −D∇E. The scalar implicit transport solve uses composite-grid multigrid and an iterative linear solver. Both time integrators are first order.

The suite includes Gaussian scattering, Marshak heating, a Gaussian emitter, explicit thin positive-opacity wave/front comparisons, and moving-gas shock/blast problems on CPU at physical light speed. A configured case does not establish that a solve converged; only validated completed runs appear as results. Flux diagnostics in FLD have no separate M1 momentum conservation test. A difference between paired M1 and FLD solutions is a model comparison, not an analytic error. ADER2 has been removed from the current solver; historical result files retain their original provenance.

Skinner & Ostriker (2013) and Hanawa & Audit (2014) provide context for the M1 equations. The implementation and saved executable/source hashes identify the actual numerical methods used in this batch.

Reproducing this batch

Descriptions document the reviewed source implementation. Older or edited solver versions can use different profile constants or averaging rules; these are not all encoded in run.ini. Use the run metadata, executable hash, and saved batch source hashes to identify the implementation behind a result. A source path or descriptive formula alone is not proof of the executable's contents.

Batch settings and source hashes Batch status